Home>Products>SKF Bearing>1120 mm x 1360 mm x 106 mm SKF NJ 18/1120 ECMA thrust ball bearings

1120 mm x 1360 mm x 106 mm SKF NJ 18/1120 ECMA thrust ball bearings
SKF NJ 18/1120 ECMA thrust ball bearings with easy-to-use parts graphics, giving you the ability to check parts 2 800 min-1 with tapered bore availability, SKF Bearing pricing, examine remanufactured options.
- SKF
NJ 18/1120 ECMA
- 2 800 min-1
- 2 200 min-1
- 2.1 mm
- 4.5 mm
- 443 kN
- 551 kN
- 8.3 mm
- 62.470 kN
-
BEARING TYCA PRIVATE LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
1120 mm x 1360 mm x 106 mm SKF NJ 18/1120 ECMA thrust ball bearingsProduct features
with tapered bore: | 2 800 min-1 | with cylindrical bore: | 2 200 min-1 | rs (min): | 2.1 mm |
Dynamic (Cr): | 4.5 mm | Pu: | 443 kN | Grease: | 551 kN |
Static (Cor): | 8.3 mm | Oil: | 62.470 kN | B: | 58 mm |
D: | 170 mm | Size (mm): | 1120 mm x 1360 mm x 106 mm |
1120 mm x 1360 mm x 106 mm SKF NJ 18/1120 ECMA thrust ball bearingsSpecifications
SKF NJ 18/1120 ECMA bearing Size Chart (mm/inches) | |
---|---|
d | 0.3750 in |
ball material: | Alloy Steel - heat treated - chrome plated |
misalignment angle: | 22 ° |
lubrication: | Unlubricated |
shank thread length: | 1.2500 in |
head diameter: | 1.0000 in |
rod end type: | Male Threaded with Male Stud |
head width: | 0.3590 in |
shank thread size: | 3/8-24 |
ball width: | 0.5000 in |
thread direction: | Right Hand |
length to ball center: | 1.9380 in |
grade: | Economy/General Purpose |
standards met: | SAEJ1120 |
lubrication type: | With Lubrication Fitting |
series: | CM |
housing material: | Carbon Steel - Corrosion Resistant Plating |
1120 mm x 1360 mm x 106 mm SKF NJ 18/1120 ECMA thrust ball bearings Cad Models
Contact Us

- BEARING TYCA PRIVATE LTD.
- Address8th Floor,"C " Landmark Building, AJC Bose Road, Kolkata - 700020, India
- Phone(Working Time)63-2-759-4409
- Fax
Related News
How can you tell the difference between a ball bearing and a journal bearing turbo? |
How do you attach a bearing to a shaft? |
How is preload adjusted? |